# USMID @(#)pif/unicos/sysinfo.default	100.9	05/14/98 13:15:26
#
#       (C) COPYRIGHT CRAY RESEARCH, INC.
#       UNPUBLISHED PROPRIETARY INFORMATION.
#       ALL RIGHTS RESERVED.
#

#############################
#  Site Specific Parameters 
#############################

#	Debug Option
SYS_DEBUG=OFF

#	System Serial Number
SYS_SERIALNO=9537

#	System Name  -  Do not normally change this
SYS_NAME=sn${SYS_SERIALNO}

#	SWS IP Address
SYS_SWSIP="192.168.66.91"

#	SWS Network Node Name  -  For example: wsel9
#	(First node name specified in the SWS /etc/hosts entry for
#        the above SWS IP Address)
SWSHOST="atlas"

#	Cray IP Address
SYS_CRAYIP="192.168.66.92"

#	Cray Network Node Name  -  For example: mfel9
#	(First node name specified in the SWS /etc/hosts entry for
#        the above Cray IP Address)
SYS_CRAYHOST="wopr"

#	Router IP Address
SYS_ROUTERIP="192.168.66.1"

#	Router Network Node Name
#	(First node name specified in the SWS /etc/hosts entry for
#        the above Router IP Address)
SYS_ROUTERHOST="gateway"

#	Network Interface Name  -  Valid options:  gether0, gfddi0, ...
SYS_IFNAME="gether0"

#	Network Mask ID
SYS_NETMASK="0xffffff00"

#	New Root System Mount Point
SYS_MNT="/newroot"

#	New Root/Usr/Src Partitions
SYS_ROOT_FS="roota"
SYS_USR_FS="usra"
SYS_SRC_FS="srca"

#	Old Root System Mount Point
SYS_OLDROOT="/"

#	Upgrade install keyword  -  Valid options:  NO=initial, YES=upgrade
UPGRADE="NO"

#	CDROM or CDROM Image UNICOS Directory
SYS_CDROM=/cdrom/cdrom0/UNICOS_exe

#	OWS-E directory where the UNICOS kernel and mainframe binaries reside
SYS_OWSE_FILES=/home/owse/cri/os/uts/

#	Number of concurrent nmake command update jobs used during the
#	installation process (nmake -j option).  Do not exceed number of CPUs.
SYS_NPROC=4

#	Number of CPUs
SYS_CPUS=32

#	Amount of Memory in megawords
SYS_MEMORY=1024

#       T90 Memory Type        -  Single code for type of memory modules used.
#				  Valid options: CM02|CM03|CM04
SYS_T90MEM="CM02"

#	J90se Backplane Type   -  See jconfig(8) man page for more information
#			          on the J90se hardware parameters.
#			          Valid options: 2 = 2x2, 4 = 4x4, 8 = 8x8
SYS_BPTYPE=8

#	J90se Cpu Bitmap       -  Hexadecimal bitmap of all CPUs.
#			          One letter for each processor module.
#	                          The right most value is the bitmap for pm0.
#			          Valid options: 1-FFFFFFFF
SYS_CPUBITMAP=FFFFFFFF

#	J90se CPU Type List    -  Single digit codes for type of CPU module.
#			          One letter for each processor module.
#			          The right most value is the code for pm0.
#			          Valid options: 1 = J90se, 0 = J90 classic
SYS_CPTYPES=11111111

#	J90se Memory Bitmap    -  Hexadecimal bitmap of all memory modules.
#			          One letter for every four memory modules.
#	                          The right most value is the bitmap for mem0.
#				  Valid options: 3 = 2x2, F = 4x4, FF = 8x8
SYS_MEMBITMAP=FF

#	J90se Memory Type List -  Single digit codes for type of memory module.
#			          One letter for each memory module.
#	                          The left most value is the code for mem0.
#		                  Valid options: 0|3|5|8|B|D|F|P|S|U|V|Y
SYS_MEMLST="S:S:S:S:S:S:S:S"

#	J90 private ethernet address -  IP address for private ethernet 
#					of J90 console on Model V-IOS systems
PEIP="10.1.0.1"

# J90 Model V-IOS list - Leave all entries in, and don't change the
#	second field if that ios is not present
# 	First field is the private ethernet address
#	Second field is the IP address of the IOS
#
 IOS[0]="00:80:b6:04:89:40 10.1.0.02"
 IOS[1]="00:80:b6:04:6f:40 10.1.0.03"
 IOS[2]="00:80:b6:04:6d:40 10.1.0.04"
 IOS[3]="00:80:b6:04:63:40 10.1.0.05"
 IOS[4]="00:80:b6:00:00:00 10.1.XX.XX"
 IOS[5]="00:80:b6:00:00:00 10.1.XX.XX"
 IOS[6]="00:80:b6:00:00:00 10.1.XX.XX"
 IOS[7]="00:80:b6:00:00:00 10.1.XX.XX"
 IOS[8]="00:80:b6:00:00:00 10.1.XX.XX"
 IOS[9]="00:80:b6:00:00:00 10.1.XX.XX"
IOS[10]="00:80:b6:00:00:00 10.1.XX.XX"
IOS[11]="00:80:b6:00:00:00 10.1.XX.XX"
IOS[12]="00:80:b6:00:00:00 10.1.XX.XX"
IOS[13]="00:80:b6:00:00:00 10.1.XX.XX"
IOS[14]="00:80:b6:00:00:00 10.1.XX.XX"
IOS[15]="00:80:b6:00:00:00 10.1.XX.XX"