CobraNet Version 2.9.16.1 This is QSC build #1 and is the RAVE production release in support of user-configurable low-latency operation at 2 2/3 ms. Version 2.9.16.1 offers full configuration and monitoring via SNMP. This release ships standard in the default latency mode of 5 1/3 ms. Audio resolution on all transmitters is defaulted to 20-bit resolution. Management access via the network is optimized and serial bridging capability is enabled. All standard RAVE features are included. Version 2.9.16.1 may be operated on either network repeater or network switch LAN configurations in the default latency mode. Low-latency operation, which must be configured via SNMP,is only supported on network switch topologies. CobraNet Version 2.9.16.2 This is QSC build #2 and is a RAVE convenience release in support of low-latency operation at 2 2/3 ms. Version 2.9.16.2 offers fixed low-latency operation. This release allows users to take advantage of low-latency operation without the need for SNMP configuration. Version 2.9.16.2 offers full SNMP configuration and monitoring management with the exception of latency control. Latency is read-only. Version 2.9.16.2 offers pre-configured 24-bit audio resolution on RAVE 188s24 and RAVE 161s24 transmitters. Management access via the network is optimized and serial bridging capability is disabled. All standard RAVE features are included. Version 2.9.16.2 may only be operated on network switch LAN configurations. Version 2.9.16.2 reports the system description (sysDescr) with "2x" following the model name, indicating that the RAVE is operating at twice the standard frame rate. Improvements to CobraNet Version 2.9.16.x (2.9.16.1 and 2.9.16.2) 2.9.16.x is a maintenance release. From a user's persepctive, the only noticeable improvement is the addition of a memory inspector utilility to test memory locations and decipher model variabnts and the extension to the error code listing.