Code 9 -- Symbol library -- parameter structure _____________________________________________________________ | p1 | p2 | p3 | p4 | p5 | |code num.| staff num.| horiz. pos.| vert. pos.| libr. number | |____9____|___________|____________|___________|______________| ________________________________________________ | p6 | p7 | p8 | p9 | | horz. size | vert. size | thickness | rotation | |____________|____________|___________|__________| The normal vertical position (position at p4 = 0) for Code 9 library items varies. * P5 library number table: 0 = treble clef 10 = double sharp 20 = note tail 1 = bass " 11 = black note 21 = wedge accent 2 = alto " 12 = half note 22 = normal accent 3 = (not used) 13 = whole note 23 = tenuto (dash) 4 = percuss. clef 14 = breve 24 = staccato (dot) 5 = curved brace 15 = white diamond 25 = wedge-dot 6 = flat 16 = black " 26 = accent-dot 7 = sharp 17 = x note 27 = tenuto-dot 8 = natural 18 = common time C 28 = down bow 9 = double flat 19 = slash, alla breve 29 = up bow 30 = harmonic 40 = breve rest 50 = pppp 31 = fermata 41 = whole rest 51 = ppp 32 = arsis sign 42 = half rest 52 = pp 33 = thesis sign 43 = quarter rest 53 = p 34 = mordant 44 = eighth rest 54 = mp 35 = inverted mordant 45 = 8va 55 = mf 36 = heavy wedge 46 = 8ba 56 = f 37 = tr 47 = 15ma 57 = ff 38 = + 48 = pedal sign 58 = fff 39 = measure repeat 49 = pedal filler 59 = ffff * 60 = fp 70 = Ped. 80 = meno 61 = sf 71 = star 81 = piu 62 = sfz 72 = gliss. 82 = arrow 63 = cresc. 73 = molto 83 = long arrow 64 = dim. 74 = "segno" 84 = old pedal sign 65 = rit. 75 = turn 85 = subito 66 = pizz. 76 = // 86 = poco 67 = arco 77 = system divider 87 = guitar chord grid 68 = accel. 78 = a tempo 88 = open circle 69 = arrow 79 = (open) 89 = black circle 90 = circle+ 100 = early mus. notes 110 = F clef 91 = ( ) 101 = " 111 = decresc. 92 = (>) 102 = " 112 = coda sign 93 = ornament 103 = " 113 = rall. 94 = " 104 = " 114 = mosso 95 = diamondX 105 = " 96 = bracket 106 = " 97 = (b) 107 = " 98 = (#) 108 = " 99 = (nat.) 109 = " * P6 is the horizontal size factor. However if p7 is left at zero the horizontal and vertical sizes are both controled by p6. P8 values are entered in the form "x0y", where x = the added vertical thickness and y = the added horizontal thickness. P9 = clockwise rotation in degrees. .